Innovative highlights of the exhibit：

No alcohol, no traditional fountain solution, save ink, save paper, save water, improve PS version, CTP version of the rate of resistance to printing, than the traditional printing process to save at least one-third of the cost.

Product introduction:

1, the new generation of alcohol-free fountain solution, can completely replace the traditional printing fountain solution and alcohol, the effect is good, can be used for various models and inks, and is suitable for CTP version and PS version. 2. No alcohol, no traditional fountain solution, save ink, paper, water, improve the PS version, CTP version of the printing rate, than the traditional printing process to save at least one-third of the cost. 3. Improve the ink saturation and brightness, improve the ink wear resistance, improve the ink drying speed, improve the quality of printing. 4, control ink over emulsification, water film thin and uniform, dot clear, good reducibility, to ensure a fast and stable start-up of ink balance. The use of this product will not be stopped and dry version problems. 5. Eliminate the safety hazard of having a low alcohol flash point (only 12 * C) .

Innovative highlights of the exhibit：

Suitable for high-speed rotary press, apply to turbine, brush and sealed spray wetting system.

Product introduction:

1. apply to newspaper high-speed rotary machine, apply to turbine, brush and sealed spray wetting system. 2. Good PH buffer function, ink will not be too emulsified, water surface tension, water film spread thin and uniform quickly, ink balance easy to control, dot more clear. 3. the use of a variety of hydrophilic, water-retaining materials, when the shutdown will not dry version, do not need to use plate protectors. 4.no need to add alcohol or isopropyl alcohol, the printing surface can not afford dirty, realistic color effect. 5.not dirty, no foam, effective prevention of mechanical corrosion, blanket surface will not pile up ink.

Innovative highlights of the exhibit：

Can completely replace the traditional printing fountain solution and alcohol, the effect is good, can be used for various models and inks, and suitable for CTP version and PS version.

Product introduction:

1. The new generation of alcohol-free fountain solution, can completely replace the traditional printing fountain solution and alcohol, good effect, suitable for various models and inks, and suitable for CTP version and PS version. 2. Using alcohol-free fountain solution can save ink, paper and water, improve the print-resistant rate of PS and CTP plates, and save one-third of the cost compared with traditional printing process. 3. Ink will not be over-emulsified, the formation of water film thin and uniform, dot clear, good reducibility, to ensure a fast and stable boot ink balance. The use of this product will not be stopped and dry version problems. 4. The hidden danger of low flash point (only 12 ° C) of alcohol is eliminated, and the harm of alcohol volatilization to human health is reduced.

Innovative highlights of the exhibit：

Moistening version fast, small amount of water, no foaming, reduce paper damage, reduce paper waste, ink drying fast.

Product introduction:

1. Apply to high-speed commercial rotary machine, using this product, printed matter will not appear bottom gray phenomenon. 2. Use a variety of hydrophilic, water-retaining materials, will not dry version when shutdown, do not need to use plate protectors. 3. Good PH buffer function, ink will not be too emulsified, water film spread thin and uniform quickly, ink balance easy to control, dot more clear. 4. Moistening version fast, small amount of water, no foaming, reduce paper damage, reduce paper waste, ink drying fast. 5. No need to add alcohol or isopropyl alcohol, can achieve printing surface can not afford dirty, realistic color effect.

Innovative highlights of the exhibit：

Use less, strong cleaning ability, blanket clean, save scrubbing cloth.

Product introduction:

1. Non-flammable Goods, safety and environmental protection, reduce VOC emissions; protection blanket does not happen swelling, blanket long use cycle. 2. Use less, strong cleaning ability, blanket clean, save scrubbing cloth. 3. Applicable to all kinds of rotary and plate printing machine automatic cleaning system. Notes: 1. The cleaning agent can not clean the water roll, the cleaning water roll need special water roll cleaning agent. 2. Avoid splashing into eyes, if splashing into eyes, please immediately rinse with water, this product is not edible. Semi-aqueous cleaning agent with flash point greater than 100, in accordance with GB 38508-2020 standards for volatile organic compounds.

Innovative highlights of the exhibit：

Super cleaning ability; fast removal of ink roller and blanket on the ink stains and paper powder.

Product introduction:

1. Super cleaning ability; fast removal of ink roller and blanket on the ink stains and paper powder. 2. Protect rollers, blanket does not happen swelling, delay the use of the cycle. 3. It is suitable for all kinds of Rotary printing press, all kinds of plate printing machines and proofing machines. This product is non-flammable, safe, Environmental Protection, no smell; VOC emission is low. How to use it: 1. Will product into the rollers, low-speed idling 1 to 2 minutes, wait for the ink dissolved, with a little water can be cleaned. 2. Clean blanket when the product into the cloth, Wipe 2-3 times can be; in case of double-tape paper powder too much, can be soaked in the product on the cloth less spray water to wipe.

Innovative highlights of the exhibit：

Suitable for high-speed commercial transfer machine and gravure printing silicone coating system, improve the folding machine and binding machine processing characteristics.

Product introduction:

1. Lubricant emulsion, suitable for high-speed commercial transfer machine and gravure printing silicone coating system, improve the folding machine and binding machine processing characteristics. 2. Silicon, wax, wetting agent and re-wetting additive mixture, this coating with good wear resistance and smoothness in the paper tape re-wetting at the same time with good wettability, in the guide section and folding machine can not afford dirty. How to use it: 1. Can use a variety of common coating equipment coating, according to the need to achieve the required smoothness and re-wetting, according to 1:20 -1:40 ratio dilution. 2. Water-based emulsion, harmless to human body, strong anti-static effect. Storage and transportation: anti-freezing and prevent 30 ° C above high temperature (prevent sun and radiation, etc.) ! Shake well before using.

Innovative highlights of the exhibit：

Strong removal of CTP plate, PS plate produced in the printing process of dirt and dirt, clean the page, PS plate on the scratches have a good repair function.

Product introduction:

1. This product can strongly remove CTP version, PS version produced in the printing process of ink and dirt, clean the page, PS version of the scratches have a good repair function. 2. Use this product will not damage graphics and text, dot clear, effectively prevent non-graphics and text part of the ink, the blank part of the formation of an excellent hydrophilic film, inhibit all the dirty layout. 3. Remove the layout ink at the same time, improve the image and text part of the fat sensitivity, improve the ink adhesion. 4. This product can also be used as a pre-printing open cleaner.

Innovative highlights of the exhibit：

Effectively remove dirt, fungi, algae, mucus, ink and other undesirable phenomena from water tanks and piping systems.

Product introduction:

1. This product is used for all rotary machines and offset printing machine fountain solution circulation system cleaning agent, can effectively remove the water tank and pipe system generated by the dirt, fungi, algae, mucus, ink and other undesirable phenomena. 2. This product is diluted with 1:10 or 1:15 water. 3. Pour the product into the fountain solution of the water tank and mix with water, depending on the amount of water tank pollution and change, normal operation after 30 -50 minutes to empty the cleaning fluid. 4. Then use enough water circulation after 30 minutes of water discharge, when necessary, you need to use water rinse clean can be matched fountain solution normal printing. 5. It is recommended to wash every 60 days.

Innovative highlights of the exhibit：

1. Reduce the imprint cylinder, such as the ink on the cylinder. 2. Reduce the negative side of the printing mosaics, pull hair.

Product introduction:

1. Reduce the imprint cylinder, such as the ink on the cylinder. 2. Reduce the negative side of the printing mosaics, pull hair. 3. Reduce the number of shots after cleaning. Four. Printing toner paper or double offset paper effect is better. How to use it: 1. For the imprint drum: with a clean towel on the clean and dry imprint drum (rear drum) evenly coated with a layer, and then apply the coating evenly spread, do not apply too thick, let the paste dry (about 5 minutes) . 2. Appearance: Creamy 3. Color: white

Innovative highlights of the exhibit：

Strong removal of calcium salt deposits on rollers and other stubborn stains (mirror phenomenon) , can effectively restore its ink conductivity and ink affinity, to prevent the formation of calcification on rollers.

Product introduction:

1. It can effectively remove the hard-to-remove calcium precipitate and other stubborn stains (mirror phenomenon) on the roller, and can effectively restore its ink guiding and ink-affinity without damaging the roller, after cleaning can prevent the formation of calcification (mirror phenomenon) on rollers. 2. It can also remove calcareous crystal on water roller and make their surface show a complete hydrophilic, water transfer characteristics. Can also remove the blanket surface of paper powder and the accumulation of crystallization surface. 3. Ink color, especially from dark to light and cleaning gold, silver ink when the use, you can be surprised to find it has a very good cleaning ink effect.

Innovative highlights of the exhibit：

Shinkan is an ideal alternative to “Dusting” products, widely adapted to film, glazing and other packaging post-press processing technology, it applies to all kinds of paper and ink.

Product introduction:

1. Shinkan is a new ink toner developed by Hefei Huanzhao polymer material factory. It successfully solves the world's problem of sticking dirt on the back of printed matter during delivery. Shinkan is an ideal alternative to dusting. 2. New Ink Toner, directly into the ink, do not use or less dusting, stacking paper does not stick dirty. Shinkan also has “In the ink is not crusted, printed on paper dry quickly” superior performance, can be widely used for film, glazing and other packaging post-press processing technology, it applies to all kinds of paper and ink. 3. According to the weight of the ink 4% -5% to add, stir evenly. And the use of this product without adding ink and other accessories. 4. The normal stacking of paper, printed after 10-15 minutes to remove, to avoid external forces caused by printing dirty rub.

Innovative highlights of the exhibit：

Using the wet cleaning cloth of the cleaning agent is beneficial to improving the working efficiency, reducing the cleaning times of the blanket, making the blanket cleaner and extending the service life of the blanket.

Product introduction:

Using the wet cleaning cloth of the cleaning agent is beneficial to improving the working efficiency, reducing the cleaning times of the blanket, making the blanket cleaner and extending the service life of the blanket.

Innovative highlights of the exhibit：

Wet cloth with a special solvent even dip in the cleaning cloth, superior absorbent effect, cleaning the solvent will not be sprayed behind the blanket caused by other pollution.

Product introduction:

1. Excellent suction performance to achieve a thorough cleaning effect. 2. Using high-quality non-woven fabric material, good tensile strength, high wear resistance, no hair, no fiber shedding. 3. Wet cloth with a special solvent even dip in the cleaning cloth, superior absorbent effect, cleaning the solvent will not be sprayed behind the blanket caused by other pollution. 4. Greatly reduce the use of cleaning agents, reduce VOC harm to staff, clean the environment of the printing workshop. According to the customer's model requirements, you can choose different sizes.

Innovative highlights of the exhibit：

Strong removal of chrome (copper) or rubber roll surface with the ink, grease chemicals, paper wool, peach gum and other dirt.

Product introduction:

1. Capable of strong removal of chrome (copper) or rubber roll surface with the ink, grease chemicals, paper wool, peach gum and other dirt. After cleaning the water roll with strong hydrophilicity and anti-ink, this product can also be used for“Water velvet sleeve cleaning.”. 2. Apply proper amount of the solution to a cotton cloth or sponge and wipe away the dirt on the water roller evenly. 3. Be careful not to spill on the printing plate. If spilled on the plate, immediately clean with water. After work, this product cleaning is the best way to maintain the water roll.